Assorted Commands

* Force 100mb Full-duplex on the HME driver
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100fdx_cap=1
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10hdx_cap=0
set hme:hme_adv_10fdx_cap=0
* End of HME configuration

*Increase PTY's

in /etc/system:

set pt_cnt=256

-then-

reboot -- -r

-or-

adb -k -w /dev/ksysms /dev/mem
 pt_cnt/D #shows number of current pty's
 pt_cnt?W${newcount}  #${newcount} needs to be in hex form

-then-

set pt_cnt=256

-then-

drvconfig
devlinks

The End

Measureware Cheat Sheet

pv - starts measureware gui
perfstat - shows if the pv daemons are running.
mwa [start stop restart] all - starts / stops / restarts daemons on monitored system.

To stop the symon agents type:
/usr/sbin/SUNWsymon/es-stop -a

To start the symon agents again type:
/usr/sbin/SUNWsymon/es-start -a

Verify the symon agents are running by typing:  ps -ef | grep esd

You should see something like the following output:

esd - init agent -dir /var/opt/SUNWsymon -q
esd - init trap -dir /var/opt/SUNWsymon -q
esd - init topology -dir /var/opt/SUNWsymon -q
esd - init event -dir /var/opt/SUNWsymon -q
esd - init cfgserver -dir /var/opt/SUNWsymon -q